Universal Cylindrical Grinder
MODELS
 RS-1 mm RS-2 mm RS-3 mm RS-4 mm RS-5 mm
Max. Grinding Length
 225 355 600 1000 5000
Max. Height of Center
 110 130 130 130 300
Max. Swing Over Table
 202 254 254 254 600
Max. Grinding Diameter
 40 76 101 101 460
No. of Table Feeds
 - 3 3 3 3
Range of Table Feeds Per Minute
 - 100-175-275 100-175-275 100-175-275 0-800
Max. Table Swivel
 70 70 70 70 Fixed
Electrical Motor for table drive
 - 1.5 hp 1440 rpm 1.5 hp 1440 rpm 1.5 hp 1440 rpm 3 HP
Workhead Swivel on either Side
 900 900 900 900  
Work Spindle Speeds
 - 4 4 4 4
Work Spindle Speedsrange
 - 58-80-105-130 58-80-105-130 58-80-105-130 45-130
Work head motor with 1440 rpm
 1 h.p. 1 h.p 1 h.p 1 h.p 3 HP
Morse taper
 MT-1 MT-3 MT-4 MT-4 MT-6
Traverse Movem110ent of wheel head max
 88 88 88 88 300
Size of grinding wheel
 304 X 25 X 801 355 X 38 X 127 355 X 38 X 127 355 X 38 X 127 760 X 50 X 75
RPM of grinding wheel (two range)
 - 1650-2200 1650-2200 1650-2200 300
Wheel head motor with 1440 rpm
 2 h.p. 3 h.p. 3 h.p. 3 h.p. 15 HP
Motor rpm for internal grinding attachment
 1440 rpm 2800 rpm 2800 rpm 2800 rpm 3 HP / 3100rpm
Max. internal grinding depth
 - 101 101 101 105
Motor rpm of work head & wheel head
 1440 rpm 1440 rpm 1440 rpm 1440 rpm 800-1440 rpm
Floor Space
 850 x 1180 1000 x 1525 1075 x 1825 1075 x 2400 11500 x 2100
Approx. Weight Kgs.
 1050 1400 2100 2600 16000