MODELS |
UNITS |
600/800 |
1000/1200 |
SIZE & CAPACITY |
Center height |
mm |
130 |
155 |
Center distance |
mm |
600/800 |
1000 / 1200 |
Max. grinding delta for efficiently grinding Std. |
mm |
125 |
125 |
WHEEL HEAD |
Peripheral surface speed (Two steps) |
m/sec. |
28 |
28 |
Clockwise |
deg. |
60 |
60 |
Counter clockwise |
deg. |
45 |
45 |
Grinding wheel (delta x width x Bore) |
mm |
350 x 40 x 127 |
400 x 40 x 127 |
INFEED SYSTEM |
Rapid approach |
mm |
40 |
40 |
Increment infeed on delta |
mm |
0.005 |
0.005 |
infeed with hand wheel |
mm |
60 |
60 |
* Infeed with hand wheel |
mm |
95 |
95 |
** Max. plunge depth on delta |
mm |
0.75 |
0.75 |
Infeed rate on delta variable |
mm/min |
0.1 - 6 |
0.1 - 6 |
Spark off time |
sec. |
0 - 30 |
0 - 30 |
TABLE TRAVERSE |
Max. stroke |
mm |
650 - 850 |
1050 - 1250 |
Min. stroke |
mm |
10 |
10 |
Feed rate |
mm/min |
30 - 4000 |
30 - 3500 |
Dwell at reversal |
sec. |
|
0 - 30 |
Swivel |
deg. |
-3 + 9 |
-3 + 6 |
* Feed rate in steps |
|
6 |
6 |
WORK HEAD |
Live & dead center type counter clockwise |
deg. |
90 |
90 |
Taper bore |
MT |
3 |
4 |
Spindle speed 6 steps |
RPM |
45 - 250 |
45 - 250 |
** Steplessly variable |
RPM |
30 - 500 |
30 - 500 |
TAIL STOCK |
Adjustable pressure, taper bore |
MT |
3 |
4 |
Quill travel |
mm |
25 |
25 |
ELECTRICAL MOTORS |
Wheel head |
kw. |
2.2 |
3.7 |
Work head |
kw. |
0.75 |
0.75 |
Internal grinding |
kw. |
0.75 |
0.75 |
Hydraulic pump motor |
kw. |
0.75 |
0.75 |
Coolant pump |
kw. |
0.10 |
0.10 |
* Table feed |
kw. |
0.37 |
0.37 |
INTERNAL GRINDING ATTACHMENT |
Spindle housing bore |
mm |
80 |
80 |
Standard spindle delta |
mm |
60 x 250 |
60 x 250 |
Spindle speed standard |
RPM |
18000 |
18000 |
FLOOR AREA |
Width |
mm |
1500 |
1500 |
Length |
mm |
3350 x 3750 |
4250 x 4650 |
| |
|
|
|
|
